The W1AAD repeater was off the air for a time today to allow some additional changes to be made on the ircDDBGateway software (our thanks to VK4TUX, Adrian, who is doing that work for us, and Pete, W1LAB, who had to go to the repeater site to reboot it this afternoon).<\/p>\n
The original DPLUS software services, that are used to link to the DPLUS reflectors, like REF069C, was working but preventing smooth operation of all the new linking features. \u00a0A decision was made to turn DPLUS off, and doing that seemed to fix all the voice identification issues and allow linking of any reflector via DTMF.<\/p>\n
To use a DTMF command, please make sure your UR field is set to CQCQCQ, which is the normal setting for carrying out a conversation on the repeater. \u00a0The following DTMF commands will then work:<\/p>\n
0 –> Will give you a voice announcement of link status
\n# –> Will unlink the repeater
\n** –> Will link to the default reflector, which is REF069C<\/p>\n
*50C –> Will link to REF050C
\nB2A –> Will link to XRF002A
\nD5A –> Will link to DCS005B
\nD523 –> Will link to DCS005W
\nTwo digit codes “01” to “26” can be used to represent the “A” to “Z” letters
\nHence, “W” is 23. \u00a0By the way D502 would be the same as DCS005B.<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
The W1AAD repeater was off the air for a time today to allow some additional changes to be made on the ircDDBGateway software (our thanks to VK4TUX, Adrian, who is doing that work for us, and Pete, W1LAB, who had … Continue reading